How to Die Cut Circle Shapes:

Apply fusible web product to the wrong side of the fabric, following manufacturer’s instructions, before cutting for fusible appliqué.

• 2" Circle: Cut 2 1/2" squares. Cut 16 circles across the width of fabric. One yard of 40" wide fabric cuts 224 circles. 
• 3" Circle: Cut 3 1/2" squares. Cut 11 circles across the width of fabric. One yard of 40" wide fabric cuts 110 circles. 
• 5" Circle: Cut 5 1/2" squares. Cut 7 circles across the width of fabric. One yard of 40" wide fabric cuts 42 circles. 

Why Quilters Love the GO! Circles Die: 

• Appliqué quilts often feature numerous circle shapes. From yo-yo projects and raw edge bull’s-eye concentric circles, to polka dots and flower centers, to apples and oranges. Now you can easily cut three sizes of perfect circles for any project you imagine! 
• No templates required. The GO! Circles die includes three circle sizes that are typically difficult to cut by hand. 
• Great value! Get multiple circle sizes for the price of one GO! Circles die. 
• Quickly and easily cut four of each pre-fused applique shape in one pass thru the cutter (fusible counts as one half layer of fabric). 
• Cut circles out of a variety of fabrics: cotton, batiks, wool, felt, flannel, fleece, Cuddle® fabrics and more! 
• A great way to use up scraps. 
• Includes free embroidery download with 3 stitches ($16 value). 
• Free pattern downloads available to get you started. 
• Charm Pack and Layer Cake-friendly.

AccuQuilt Benefits: 

• Cut so much more fabric in less time. 
• Get accurate cuts every time -- No slipping rulers or mistakes
• Easiest to use -- Simply place die on cutter, then fabric and cutting mat on top
• Save fabric with Two Tone Foam -- Get more out of your fabric by placing it only over the shape you want to cut. 
• Safe to use -- No blades come anywhere near your fingers

Die Tips: 

• With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors. 
• Blades on some dies are positioned at an angle.  Align fabric to edge of shape, not edge of die board. 
• Use good quality fabric to reduce fabric stretch. 
• It's always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct. 

How to Die Cut 2 1/2 Squares:

For best cutting results, position fabric on the lengthwise grain (straight of grain) as it goes under the roller. 

• Cut 8" strips across the width of fabric. Fanfold into 8" widths. Place on selected blade and cut. Cut 45 squares across the width of fabric. One yard of 40" wide fabric cuts 180 squares.

Why Quilters Love the GO! 2 1/2" Square Die: 

• Quilters love precut 2 1/2" squares (aka Mini Charm Packs) because there are thousands of Mini Charm Pack patterns available to choose from. 
• No more purchasing expensive Mini Charm Packs! The GO! Square-2 1/2" die is the perfect size to cut your own Mini Charm Packs with your favourite fabrics or out of fabric pieces from your stash. 
• GO! Square-2 1/2" includes nine squares on the die which means you can cut (54) 2 1/2" squares in one pass! 
• GO! Square-2 1/2" includes 1/4" seam allowances for easy alignment and piecing. 
• Quilt tops come together quickly and easily making GO! Square-2 1/2" a great beginner piecing shape and for making simple square quilts for gifts or charity. 
• Cut squares out of a variety of fabrics: cotton, batiks, wool, felt, flannel, fleece, Cuddle® fabrics and more! 
• A great way to use up scraps. 
• Free pattern downloads available to get you started. 
• Layer Cake and Fat Quarter-friendly.

AccuQuilt Benefits: 

• Cut so much more fabric in less time. 
• Get accurate cuts every time -- No slipping rulers or mistakes
• Easiest to use -- Simply place die on cutter, then fabric and cutting mat on top
• Save fabric with Two Tone Foam -- Get more out of your fabric by placing it only over the shape you want to cut. 
• Safe to use -- No blades come anywhere near your fingers

Die Tips: 

• With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors. 
• Blades on some dies are positioned at an angle.  Align fabric to edge of shape, not edge of die board. 
• Use good quality fabric to reduce fabric stretch. 
• It's always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct. 

How to Die Cut 5 1/4" Rag Squares:

For best cutting results, position fabric on the lengthwise grain (straight of grain) as it goes under the roller.

Tip: It’s a good idea to keep an extra cutting mat on hand for Rag Quilt dies. 

• Advised to start with 1 layer of fabric for rag dies.  
• 40" wide fabric: Cut 11" strips across the width of fabric. Fanfold into 5 3/4" widths. Place on selected blade and cut. Cut six rag squares across the width of fabric. One yard of 40" wide fabric cuts 36 rag squares. 
• 60" wide fabric: Cut 11" strips across the width of fabric. Fanfold into 5 3/4" widths. Place on selected blade and cut. Cut 10 rag squares across the width of fabric. One yard of 60" wide fabric cuts 60 rag squares. 

Why Quilters Love the GO! 5 1/4" Rag Square Die: 

• Quilters love rag quilts because they are easy to make and perfect for snuggling! The GO! Rag Square-5 1/4" die makes it even easier by saving hours of tedious hand cutting. 
• The GO! Rag Square-5 1/4" die features specialized dog-ears and a 1" seam allowance with 3/4" fringe cut to a consistent 1/4" width for easy alignment and piecing. 
• Four GO! Rag Square-5 1/4" sewn together equals one GO! Rag Square-8 1/2" (55013)—piece rag squares together for a different design. 
• Rag quilts make great gifts for new babies, graduations, the holidays and more. You can change the number and size of the 5 1/4" rag squares in the quilt to make it larger or smaller. 
• Use GO! Square-3 1/4" (55317) to cut batting squares to make rag quilts even warmer. 
• Rag quilts are typically laundered to fully “bloom” the fringe. 
• Cut rag squares out of a variety of fabrics: flannels, homespun fabric, fleece, cotton, Cuddle® fabrics and more! 
• GO! Rag Square-5 1/4" is designed to work with appliqué shapes that are 2 1/4" or smaller. 
• Free pattern downloads available to get you started. 
• Fat Quarter-friendly.

AccuQuilt Benefits: 

• Cut so much more fabric in less time. 
• Get accurate cuts every time -- No slipping rulers or mistakes
• Easiest to use -- Simply place die on cutter, then fabric and cutting mat on top
• Save fabric with Two Tone Foam -- Get more out of your fabric by placing it only over the shape you want to cut. 
• Safe to use -- No blades come anywhere near your fingers

Die Tips: 

• With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors. 
• Blades on some dies are positioned at an angle.  Align fabric to edge of shape, not edge of die board. 
• Use good quality fabric to reduce fabric stretch. 
• It's always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct. 

How to Die Cut Flying Geese Units:

For best cutting results, position fabric on the lengthwise grain (straight of grain) as it goes under the roller. 

• 3" Finished Half Square Triangles: Cut 4 3/4" strips across the width of fabric. Fanfold into 4" widths. Place on selected blade and cut. Cut 20 triangles across the width of fabric. One yard of 40" wide fabric cuts 140 triangles. 
• 6" Finished Quarter Square Triangles: Cut 7" strips across the width of fabric. Fanfold into 4" widths. Place on selected blade and cut. Cut 10 triangles across the width of fabric. One yard of 40" wide fabric cuts 50 triangles. 

Why Quilters Love the GO! Flying Geese Die: 

• Flying Geese are the foundation of many quilt blocks. They are simple, versatile and quick to make. Flying Geese can stand alone as a single block or can be used to make many other famous quilt blocks like the Sawtooth Star. 
• No templates! No measuring! The GO! Flying Geese die cuts one 6" finished quarter square triangle (the goose) and two 3" finished half square triangles (the sky) to create one 3" x 6" Flying Geese unit. Combine two units for a 6" finished block. 
• GO! Flying Geese features specialized dog-ears and includes 1/4" seam allowances for easy alignment and piecing. 
• Cut Flying Geese units out of a variety of fabrics: cotton, batiks, wool, felt, flannel, fleece, Cuddle® fabrics and more! 
• A great way to use up scraps. 
• Free pattern downloads available to get you started. 
• Layer Cake and Fat Quarter-friendly.

AccuQuilt Benefits: 

• Cut so much more fabric in less time. 
• Get accurate cuts every time -- No slipping rulers or mistakes
• Easiest to use -- Simply place die on cutter, then fabric and cutting mat on top
• Save fabric with Two Tone Foam -- Get more out of your fabric by placing it only over the shape you want to cut. 
• Safe to use -- No blades come anywhere near your fingers

Die Tips: 

• With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors. 
• Blades on some dies are positioned at an angle.  Align fabric to edge of shape, not edge of die board. 
• Use good quality fabric to reduce fabric stretch. 
• It's always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct. 

How to Die Cut English Paper Piecing Shapes:

For best cutting results, position fabric on the lengthwise grain (straight of grain) as it goes under the roller. 

• Fabric Hexagons: Cut 6" strips across the width of fabric. Fanfold strip covering the larger hexagon shapes on the die board. Cut 32 hexagons across the width of fabric. One yard of 40" wide fabric cuts 192 hexagons. 
• Hexagon Paper Pieces: Cut 16 hexagons out of an 8 1/2" x 11" sheet of paper or cardstock. 

Why Quilters Love the GO! English Paper Piecing Die: 

• English Paper Piecing, or EPP as the truly hexie-addicted hand-stitchers call it, is the perfect “purse project.” GO! English Paper Piecing dies are designed to cut both the fabric and the paper (or cardstock) for English Paper Piecing on one die board. 
• No templates! No measuring! No need to purchase expensive paper templates! The GO! English Paper Piecing dies allow you to cut out as many or as few hexies and paper templates as needed for a project without having to use a rotary cutter or ruler. 
• Imagine the time you will save cutting! This die cuts up to two layers of paper or cardstock on the smaller hexagons (eight in one pass thru the cutter) and up to six layers of cotton fabric on the larger hexagons (24 in one pass thru the cutter). 
• GO! English Paper Piecing includes 1/4" seam allowances on the larger hexagons for cutting fabric. 
• A great way to use up scraps. 
• Free pattern downloads available to get you started. 
• Charm Pack-friendly.

AccuQuilt Benefits: 

• Cut so much more fabric in less time. 
• Get accurate cuts every time -- No slipping rulers or mistakes
• Easiest to use -- Simply place die on cutter, then fabric and cutting mat on top
• Save fabric with Two Tone Foam -- Get more out of your fabric by placing it only over the shape you want to cut. 
• Safe to use -- No blades come anywhere near your fingers

Die Tips: 

• With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors. 
• Blades on some dies are positioned at an angle.  Align fabric to edge of shape, not edge of die board. 
• Use good quality fabric to reduce fabric stretch. 
• It's always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct. 

How to Die Cut Gingerbread Cookie Shapes:

Cut 3 7/8” x 5” rectangles.  Place on selected blade and cut.  Cut eight gingerbread cookies across the width of fabric. One yard of 50” wide fabric cuts 72 gingerbread cookies. 

Why Quilters Love the GO! Gingerbread Cookie Die

• Perfect for seasonal or holiday-themed quilting projects by pairing with GO! Holiday Medley, GO! Sleigh & Snowflakes, GO! Holiday Accessories or GO! Schoolhouse (55043, 55322, 55321, 55344)
• No templates required! The GO! Gingerbread Cookie die includes an applique shapes that is difficult to cut by hand. 
• Quickly and easily cut four of each pre-fused applique shape in one pass thru the cutter (fusible counts as one half layer of fabric).
• Cut Gingerbread Cookie shapes out of a variety of fabrics: cotton, batiks, wool, felt, flannel, fleece, Cuddle® fabrics and more!
• A great way to use up scraps.
• Includes free embroidery download with 3 stitches ($14 value).
• Free pattern downloads available to get you started.
• Charm Pack-friendly

How to Die Cut 1 1/2" Strips:

• 1 1/2" Strips: Cut 8" wide strips across the width of fabric to cut five, 1 1/2" strips. Position fabric on die so fold of fabric is perpendicular to cutting blades and will roll through the cutter first. One yard of 40" wide fabric cuts 22 strips. 
• 1 1/2" Squares: Start with a 1 1/2" strip aligning it across the die board with the 90° guide line. Fanfold into 8" widths. Cut 25, 1 1/2" squares across the width of fabric. One yard of 40" wide fabric cuts 550 squares. 
• 45° Diamond-2 1/8" Cut Side Edge: Start with a 1 1/2" strip. Align your 1 1/2" strip across the die board to the right side of the 45° guide line. 
• 30° Diamond-3" Cut Side Edge: Start with a 1 1/2" strip. Align your 1 1/2" strip across the die board to the right side of the 30° guide line. 
• 60° Diamond-1 3/4" Cut Side Edge: Start with a 1 1/2" strip. Align your 1 1/2" strip across the die board to the right side of the 60° guide line.

Why Quilters Love the GO! 1 1/2" Strip Cutter Die.  

• No sliding rulers! No miscuts! The GO! Strip Cutter-1 1/2" includes five strips that can be a challenge to cut by hand. 
• Idea for scrappy quilts! Easily cut up to 6 layers of scraps or full length fabric on the die to get 15 perfectly cut 1 1/2" strips in one pass thru the cutter.
• GO! Strip Cutter-1 1/2" includes 1/4" seam allowances for easy alignment and piecing. 
• Cut perfect 1 1/2" strips, then use the angled guide lines to cut squares and diamonds. 
• Die blades are 23" long and are open at both ends to allow cutting of fabric that is still folded as it comes off the bolt. 
• Cut strips out of a variety of fabrics: cotton, batiks, flannel, fleece, Cuddle® fabrics and more! 
• Free pattern downloads available to get you started.

AccuQuilt Benefits: 

• Cut so much more fabric in less time. 
• Get accurate cuts every time -- No slipping rulers or mistakes
• Easiest to use -- Simply place die on cutter, then fabric and cutting mat on top
• Save fabric with Two Tone Foam -- Get more out of your fabric by placing it only over the shape you want to cut. 
• Safe to use -- No blades come anywhere near your fingers

Die Tips: 

• With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors. 
• Blades on some dies are positioned at an angle.  Align fabric to edge of shape, not edge of die board. 
• Use good quality fabric to reduce fabric stretch. 
• It's always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct. 

How to Die Cut 5" Squares:

For best cutting results, position fabric on the lengthwise grain (straight of grain) as it goes under the roller.

• Cut 10 1/2" strips across the width of fabric. Fanfold into 5 1/2" widths. Place on selected blade and cut. Cut 14 squares across the width of fabric. One yard of 40" wide fabric cuts 42 squares.

Why Quilters Love the GO! 5" Square Die: 

• Quilters love precut 5" squares (aka Charm Packs) because there are thousands of Charm Pack patterns available to choose from. 
• No more purchasing expensive Charm Packs! The GO! Square-5" die is the perfect size to cut your own Charm Packs with your favorite fabrics or out of fabric pieces from your stash. 
• GO! Square-5" includes two squares on the die which means you can cut (12) 5" squares in one pass!
• GO! Square-5" includes 1/4" seam allowances for easy alignment and piecing. 
• Quilt tops come together quickly and easily making GO! Square-6" a great beginner piecing shape and for making ismple square quilts for charity. 
• Use GO! Square-5" to cut smaller applique background square that are all the same size!
• Cut squares out of a variety of fabrics: cotton, batiks, wool, felt, flannel, fleece, and more!
• A great way to use up scraps. 
• Packaging includes a free pattern to get you started.  
• Layer Cake and Fat Quarter-friendly.

AccuQuilt Benefits: 

• Cut so much more fabric in less time. 
• Get accurate cuts every time -- No slipping rulers or mistakes
• Easiest to use -- Simply place die on cutter, then fabric and cutting mat on top
• Save fabric with Two Tone Foam -- Get more out of your fabric by placing it only over the shape you want to cut. 
• Safe to use -- No blades come anywhere near your fingers

Die Tips: 

• With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors. 
• Blades on some dies are positioned at an angle.  Align fabric to edge of shape, not edge of die board. 
• Use good quality fabric to reduce fabric stretch. 
• It's always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct. 

How to Die Cut Western Shapes:

Apply fusible web product to the wrong side of the fabric, following manufacturer’s instructions, before cutting for fusible appliqué. 

• Cowboy Boot: Cut 4 1/8” x 4 5/8” Rectangles. Place on selected blade and cut. Cut eight cowboy boots across the width of fabric. One yard of 40” wide fabric cuts 64 cowboy boots.
• Horseshoe: Cut 3 5/8” x 4 1/4” rectangles. Place on selected blade and cut. Cut seven horseshoes across the width of fabric. One yard of 40” wide fabric cuts 63 horseshoes.
• Horse: Cut 5” x 5 3/4” rectangles. Place on selected blade and cut. Cut six horses across the width of fabric. One yard of 40” wide fabric cuts 42 horses.

Why Quilters Love the GO! Western Medley Limited Edition Die:

• Perfect for western or cowboy-themed quilts, baby or kids projects, quilting with kids, or just adding a bit of fun to a regular quilt.
• Get creative! Combine GO! Qube pieced blocks or your favorite Block on Board® block with western applique shapes.
• Western life is a popular quilting motif and appeals to a wide variety of quilters, novice and seasoned.
• GO! Western Medley includes three unique shapes that are difficult to cut by hand.
• Limited-edition dies come in a collectible teal-colored tray.
• Make quick appliques by applying fusible web to the wrong side of fabrics prior to cutting.
• A great way to use up scraps.
• Includes free embroidery download with 3 stitches ($22 value)
• Free pattern downloads available to get you started.
• Charm Pack and Layer Cake-friendly

AccuQuilt Benefits:

• Cut so much more fabric in less time.
• Get accurate cuts every time—No slipping rulers or mistakes
• Easiest to use – Simply place die on cutter, then fabric and cutting mat on top
• Save fabric with Two Tone Foam – Get more out of your fabric by placing it only over the shape you want to cut
• Safe to use – No blades come anywhere near your fingers

Die Tips:

• With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors.
• Blades on some dies are positioned at an angle. Align fabric to edge of shape, not edge of die board.
• Use good quality fabric to reduce fabric stretch.
• It’s always a god idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct.

How to Die Cut Holiday Accessories Shapes:

Apply fusible web product to the wrong side of the fabric, following manufacturer’s instructions, before cutting for fusible appliqué. 

• Bow: Cut and fuse 4 1/8" x 3 7/8" rectangles. Cut 10 bows across the width of fabric. One yard of 40" wide fabric cuts 80 bows.
• Scarf: Cut and fuse 2 7/8" x 2 3/4" rectangles. Cut 14 scarves across the width of fabric. One yard of 40" wide fabric cuts 168 scarves.
• Top Hat: Cut and fuse 2 3/4" x 1 7/8" rectangles. Cut 21 hats across the width of fabric. One yard of 40" wide fabric cuts 273 hats.
• Smaller Shapes: Place scraps on blade and cut.

Why Quilters Love the GO! Holiday Accessories Die:

• Designed to work with GO! Circles-2", 3", 5" (55012). Dress up snow people with your choice of hats, scarves, gloves and more! 
• No templates required! The GO! Holiday Accessories die includes 10 shapes that are difficult to cut by hand. 
• Great value! Get multiple applique shapes for the price of one GO! die. 
• Quickly and easily cut four of each pre-fused applique shape in one pass thru the cutter (fusible counts as one half layer of fabric). 
• Cut holiday shapes out of a variety of fabrics: cotton, batiks, wool, felt, flannel, fleece, Cuddle® fabrics and more! 
• A great way to use up scraps. 
• Free pattern downloads available to get you started. 
• Charm Pack-friendly.

AccuQuilt Benefits: 

• Cut so much more fabric in less time. 
• Get accurate cuts every time -- No slipping rulers or mistakes
• Easiest to use -- Simply place die on cutter, then fabric and cutting mat on top
• Save fabric with Two Tone Foam -- Get more out of your fabric by placing it only over the shape you want to cut. 
• Safe to use -- No blades come anywhere near your fingers

Die Tips: 

• With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors. 
• Blades on some dies are positioned at an angle.  Align fabric to edge of shape, not edge of die board. 
• Use good quality fabric to reduce fabric stretch. 
• It's always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct. 

How to Die Cut 2-Color Crossed Canoes Quilt Blocks:

For best cutting results, position fabric on the lengthwise grain (straight of grain) as it goes under the roller.

TIP: To create a 2-color Crossed Canoes Block: Cut two layers of one fabric color and two layers of contrasting fabric color at a time.

• Cut 6 1/4" x width of fabric (WOF) strips. Fanfold into 6 1/4" widths. Place on selected blade and cut. For a 2-color design, six cuts across the width of fabric yield enough pieces for six complete blocks. One yard of 40" wide fabric in each color will yield 30 blocks. 

Why Quilters Love the GO! Crossed Canoes Die: 

• Crossed Canoes is a Block on Board (BOB®) die which means it’s specially designed to cut one complete 2-color, 9" block in one pass through the cutter. 
• No paper piecing, or tracing and scissor-cutting templates required! Crossed Canoes includes four unique shapes that are difficult to cut by hand.
• Crossed Canoes features specialized dog-ears and includes 1/4" seam allowances for easy alignment and piecing. 
• Crossed Canoes includes screen printed letters on die for easier piecing and organization of shapes. 
• Free pattern downloads and step-by-step block assembly instructions are available to get you started. 
• Layer Cake and Fat Quarter-friendly.

AccuQuilt Benefits: 

• Cut so much more fabric in less time. 
• Get accurate cuts every time -- No slipping rulers or mistakes
• Easiest to use -- Simply place die on cutter, then fabric and cutting mat on top
• Save fabric with Two Tone Foam -- Get more out of your fabric by placing it only over the shape you want to cut. 
• Safe to use -- No blades come anywhere near your fingers

Die Tips: 

• With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors. 
• Blades on some dies are positioned at an angle.  Align fabric to edge of shape, not edge of die board. 
• Use good quality fabric to reduce fabric stretch. 
• It's always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct. 

How to Die Cut Cookie Decorations Shapes:

Apply fusible web product to the wrong side of the fabric, following manufacturer’s instructions, before cutting for fusible appliqué.

• Dress: Cut and fuse 3-5/8" x 2-5/8" rectangles. Place on selected blade and cut. Cut 12 dresses across the width of fabric. One yard of 40" wide fabric cuts 108 dresses.
• Heart: Cut and fuse 1-7/8" x 1-1/2" rectangles. Place on selected blade and cut. Cut 26 hearts across the width of fabric. One yard of 40" wide fabric cuts 494 hearts.
• Bow: Cut and fuse 1-1/2" x 13-5/8" rectangles. Place on selected blade and cut. Cut 29 bows across the width of fabric. One yard of 40" wide fabric cuts 522 bows.
• Circle/Button: Place scraps on blade and cut.

Why Quilters Love the GO! Cookie Decorations Die:

• Perfect for seasonal or holiday-themed quilting projects by pairing with our popular GO! Gingerbread Cookie (55862) die.
• No templates required! The GO! Cookie Decorations die includes 5 applique shapes that are difficult to cut by hand: Dress, Heart, Bow and (2) Circles/Buttons.
• Quickly and easily cut four of each pre-fused applique shape in one pass thru the cutter (fusible counts as one half layer of fabric).
• Cut Cookie Decorations shapes out of a variety of fabrics: cotton, batiks, wool, felt, flannel, fleece, Cuddle® fabrics and more!
• A great way to use up scraps. 
• Includes free embroidery download with 3 stitches ($14 value).
• Free pattern downloads available to get you started.
• Charm Square-friendly

How to Die Cut Scottie Dog Shapes: 

Apply fusible web product to the wrong side of the fabric, following manufacturer's instructions, before cutting for fusible applique. 

• Cut 4 7/8" x 5" rectangles.  Place on selected blade and cut.  Cut eight dogs across the width of fabric.  One yard of 40" wide fabric cuts 56 dogs. 

AccuQuilt Benefits: 

• Cut so much more fabric in less time. 
• Get accurate cuts every time -- No slipping rulers or mistakes
• Easiest to use -- Simply place die on cutter, then fabric and cutting mat on top
• Save fabric with Two Tone Foam -- Get more out of your fabric by placing it only over the shape you want to cut. 
• Safe to use -- No blades come anywhere near your fingers

Die Tips: 

• With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors. 
• Blades on some dies are positioned at an angle.  Align fabric to edge of shape, not edge of die board. 
• Use good quality fabric to reduce fabric stretch. 
• It's always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct.