Longarm Rulers

The Trailer Machine Quilting Ruler designed by Natalia Bonner

The Trailer Machine Quilting Ruler is fabulous for straight lines, 45 degree angles, curved corners and stitch in the ditch.  The ruler measures 5" wide at the widest point, 12" long at the longest point. The notches on the bottom side of the ruler are great for helping to stitch straight lines in the ditch, or visualize where your stitching will go.

The ruler is made from high-quality acrylic and measures .25" thick.

Initially designed so you can outline and echo appliquéd vines, stems and leaves,  we have found these to be  useful for quick crosshatch, continuous curves and anytime you want to create, follow or echo a curve.  They are 4 sided and notice the first solid line is 1/8"!!  

The joy of the ruler is simple...by spinning it around you seldom (if ever) need to have the ruler behind the hopping foot.  The Little Fish follows an "S" Curve from the front/side of the hopping foot.  The Little Fish gives you a slight grip on the quilt top.  Hopefully, you won't use it but there is even a hole for hanging!

Need help with double wedding ring or any other curved design?  

Use it as you are quilting or use it to chalk out your design for a little freehand fun! 

It will help you to stay along any curve. 

*Use it with Crosshatch Circles for great curved cross hatching.  A wonderful must-have for any quilter!

 1/4" thick acrylic

1/4" thick acrylic

This is an exclusive template design by Linda V. Taylor and is used for perfect crosshatch lines! 

Want to see how they work?  Click Here and see the magic! 

Each set contains several 1/4" thick acrylic circles in the following sizes: 

• 1/2 inch
• 3/4 inch
• 1 inch
• 1 1/4 inch 
• 1 1/2 inch
• 1 3/4 inch 

The circle is used by adding the template around your hopping foot, to make the hopping foot size larger!

Use the different size templates in combination with a ruler to achieve PERFECT CROSSHATCHING.  You can use them as individual circles or you can use them to enlarge other oval or circle templates! 

These were designed for the 1/2 inch hopping foot.  

** Some machines that do not have the same size hopping foot as the Gammill may need the opening trimmed down using an emery cloth.  If your foot is too small, a couple pieces of painters tape will work to make your hopping foot snug !

This product will not be compatible with BabyLock Crown Jewel, Handiquilter or Nolting.

 Want to see how this ruler works?  CLICK HERE

1/4"  thick ~ cut from 1/4"  thick clear acrylic.

The Brilliant Bindings tool with instructions for binding on the longarm and DSM.

It can also be used at the longarm machine as a ruler for stitching straight and diagonal lines.

Brilliant Bindings by Wendt Quilting 

High quality 1/4" thick acrylic curved ruler set for longarm quilting use.

- Makes quilting QCR Mini Ruler© quilts easy and fun

- Curve matches QCR Mini Ruler© curve for easy Stitch in the Ditch

- Inside and outside curve

- Straight and curved edges with guidelines for custom quilting

- Create quilting scallops in borders

- Great for curved crosshatching

- Use to mark quilts for domestic machine custom quilting

- Make quilting motif designs

- Part 1 dimensions:  2 5/8"(center) and 1 1/2"(sides) x 6"

- Part 2 dimensions:  1 7/8"(center) and 3"(sides) x 6"

The QP Edge straight rulers will open the door to endless design and quilting possibilities.

-Constructed of strong 1/4" acrylic.
-2.5" wide
-Rulers designed for used on a longarm and/or sit-down machines.
-1/4" spacing, both horizontally and vertically with 45 degree angles across the ruler.
-No longer do you need a separate ruler to mark designs that require 1/4", 1/2" or 3/4" measurements. Use the same ruler for BOTH design and quilting.
-Thin, thread width etched lines for accuracy.
-Bright white marks for increased visibility.

-The 12" for most blocks and borders.

*Remove paper backing prior to use. Begin by peeling one corner and continue across the ruler.

The QP Edge straight rulers will open the door to endless design and quilting possibilities.

-Constructed of strong 1/4" acrylic.
-2.5" wide
-Rulers designed for used on a longarm and/or sit-down machines.
-1/4" spacing, both horizontally and vertically with 45 degree angles across the ruler.
-No longer do you need a separate ruler to mark designs that require 1/4", 1/2" or 3/4" measurements. Use the same ruler for BOTH design and quilting.
-Thin, thread width etched lines for accuracy.
-Bright white marks for increased visibility.

-The 5" designed for stitch in the ditch as well as when you need a small straight edge for intricate designs.

*Remove paper backing prior to use. Begin by peeling one corner and continue across the ruler.

These rulers feature easy-to-read lines for marking and measuring fabrics as with measurements going right to left and left to right. Each ruler has a unique non-slip coating that keeps the ruler in place on fabric for easy, accurate placement. Quilters Select machine quilting rulers are
designed for use with high shank sewing machines or longarm machines with a ruler foot attachment.
6mm thick clear acrylic quilting rulers specifically made to create easy clamshell, circles, scallops and more shapes to use with a Ruler Work Presser Foot!

With the same Non-Slip coating that makes Quilters Select® Rulers a must-have for crafters everywhere, this new line of rulers brings a new level of precision to long arm quilting! Never again will you have to worry about your rulers slipping as you guide your quilt and ruler through your machine. The new finger grip holds enhance your ease of placement and movement.

Like all Quilters Select® products, this ruler is designed for both left- and right-handed quilters, with markings that can be read both ways. The 1/4in vertical lines along the sides are ideal for straight line quilting, and the 45 degree and 60 degree angle lines open more creative possibilities than ever before! 

Color: Clear

Made of: Acrylic

Use: Quilting Ruler

Size: 5" and 1"

Included: One Ruler 

These rulers feature easy-to-read lines for marking and measuring fabrics as with measurements going right to left and left to right. Each ruler has a unique non-slip coating that keeps the ruler in place on fabric for easy, accurate placement. Quilters Select machine quilting rulers are
designed for use with high shank sewing machines or longarm machines with a ruler foot attachment.
6mm thick clear acrylic quilting rulers specifically made to create easy clamshell, circles, scallops and more shapes to use with a Ruler Work Presser Foot!

With the same Non-Slip coating that makes Quilters Select® Rulers a must-have for crafters everywhere, this new line of rulers brings a new level of precision to long arm quilting! Never again will you have to worry about your rulers slipping as you guide your quilt and ruler through your machine. The new finger grip holds enhance your ease of placement and movement.

Like all Quilters Select® products, this ruler is designed for both left- and right-handed quilters, with markings that can be read both ways. The 1/4in vertical lines along the sides are ideal for straight line quilting, and the 45 degree and 60 degree angle lines open more creative possibilities than ever before! 

Color: Clear

Made of: Acrylic

Use: Quilting Ruler

Size: 6" and 1"

Included: One Ruler 

Comes with Ruler Base and attachments.

Janome EZ Ruler foot is a taller profile foot then the standard foot.

Fits Janome Quilt Maker Pro 18 and 20. 

The Westalee Design 8 Point Crosshair Ruler is for marking 4 (90°) or 8 (45°) or 16 (22.5°) or 32 (11.25°) reference lines.

When quilting on domestic, Longarm, or with embroidery this marking tool is essential. Reference lines give a much better result.

When using rotating templates, reference lines will give much more accurate spacing. On a domestic machine the quilt is not taught as on a longarm machine and there is movement of the quilt sandwich which can make it difficult to use the rotating lines on the templates. We like using our Cross Hair Ruler to locate the center and mark 4, 8, 16 and 32 lines if required.

The Westalee Design 6 Point CROSSHAIR RULER is for marking 3 (120°) or 6 (60°) or 12 (30°) or 24 (15°) reference lines, great for Hexagon Quilt patterns. The 12.5" size allows you to mark up to 12" blocks. AND The 8.5" size allows you to mark up to 8" blocks.